Accessories for Pallet racks

Universal depth-support Normapal

• Required for lateral storage of Euro-/Industral pallets,
  Placed loosely across the two beams
• 2 each required per pallet
• Max. load 1000 kg (evenly distributed) per pair
• Also suitable for reinforcing shelves for higher loading

Angle support-frame Normapal  

• Required for lateral storage of lattice boxes and Euro-pallets,
• placed across the two beams
• With rear stops
• Max. load 1000 kg (evenly distributed) per frame

• for storage of non-palletized goods, for example stacked wood or sheet metal
• rolled C-shape
• laid across the two beams
• clearence 80mm

Stack depth-support Normapal

Particle board shelf

• for packing areas in the pallet rack
• laid across the two beams
• with locking strips to prevent sliding
• bay loading up to 4500 kg (evenly distributed)
• material and thickness depending upon the loading

Wire-mesh rear wall

The sides of the rack not for loading and unloading must be secured against falling goods.

• Wire-mesh mounted in frames
• Mesh 50 x 50 mm, 3 mm thick, galvanized
• incl. fastening materials

Upright collision-protector

• Protects uprights at rack corners
• 400 mm high acc. to DIN EN 15512
• Signal Colors yellow / black
• incl. 3 anchors

Collision-protector plank

• Protects end frames in endangered areas such as drive-through aisles
• 400 mm high
• Signal Color yellow / black
• incl. anchors

Sheld panels Normapal

• for packing areas in the pallet rack
• laid across the two beams
• panel made of galvanized sheet metal
• panel width 300mm
• max. loading per panel 150 kg (evenly distributed)

Grating shelf

• for packing areas in the pallet rack
• sometime required by fire codes
• laid across the two beams
• with locking devices to prevent movement
• bay loading up to 4500 kg (evenly distributed)
• various dimensions available depending upon the loading requirements

Push-through stop

• Prevent carriers from being pushed out of the rack
• Holders are hooked into the system perforations on the rear uprights
• Made of tubing

Reinforced collision-protector

• Protects uprights at rack corners
• 400 mm high, anchored on the inside w. 30 mm stud in the corner for added safety
• Signal Colors yellow / black
• incl. anchors